Tiered Disk Pendant Light
Product code: SY-LAM-JL34-1CIA
The Tiered Disk Pendant Light is a minimalist multi-tier white aluminum pendant with stacked saucer-shaped shades hanging from a single white cable.
The Tiered Disk Pendant Light is a minimalist multi-tier white aluminum pendant with stacked saucer-shaped shades hanging from a single white cable. Available in 2 diameters (∅17.7" and ∅22.1") and 3 finishes — white, white with rose gold accent, and blue — for dining tables, kitchen islands, bedrooms, home offices, breakfast nooks, and entryways. Pairs well with Scandinavian, Nordic, mid-century modern, and minimalist interiors. E26 (US/CA) or E27 (EU/AU) base accepts standard LED bulbs up to 40W. See It In Action Tiered Disk Pendant Light · stacked saucer shades · single cable Why This Tiered Disk Pendant Light Stacked Aluminum Disks Lightweight spun aluminum shades layered for soft downward light. Single Cable Suspension Clean single white cable with a small white canopy — no visible hardware. 2 Sizes × 3 Finishes Pick 17.7" or 22.1" diameter, in white, white with rose gold, or blue. Available Configurations 🔍 Enlarge Size S ∅17.7" × H6.3" Dia 45 cm × H 16 cm · for breakfast nook, small dining table, kitchen island, bedside 1× E26 / E27 bulb ~8.8 lbs total 🔍 Enlarge Size M ∅22.1" × H7.1" Dia 56 cm × H 18 cm · for standard 6-seat dining table, larger kitchen island, entryway 1× E26 / E27 bulb ~8.8 lbs total Pick Your Finish White White + Rose Gold Blue Indoor dry location only The Tiered Disk Pendant Light is rated for indoor dry locations — dining rooms, kitchens, bedrooms, living rooms, and offices. Do not install in bathrooms above a tub or shower, kitchens directly above a sink, or any outdoor area. Drop above a dining table For dining or kitchen island installation, hang the bottom of the Tiered Disk Pendant Light 30-36 inches above the table surface. The 78.7-inch cable can be shortened during install or extended on request. Specifications Materials Spun aluminum shades · powder-coated finish Light source LED or Edison bulb (sold separately) Base type E26 (US/CA) · E27 (EU/AU) Bulb maximum 40W (LED equivalent recommended — 6-8W LED for 40W output) Recommended bulb Warm White 2700-3000K LED · dimmable LED with compatible dimmer Voltage AC 110-240V Finishes White · White + Rose Gold · Blue (pick one) Cable 78.7" (200 cm) adjustable white cable · extendable on request Canopy Small white round canopy Mounting Hardwired ceiling pendant Control Standard wall switch (not included) · dimmable with compatible LED bulb + dimmer Weight ~8.8 lbs (4 kg) Environment Indoor · dry locations only Certification Compliant with North America, EU, Australia, Saudi Arabia standards Installation Notes Hardwired ceiling install — use a licensed electrician. Hang 30-36" above dining table or kitchen island surface. E26 (US/CA) or E27 (EU/AU) Warm LED bulb up to 40W. For dimming, pair a dimmable LED bulb with a compatible wall dimmer. Downloads & Resources Spec Sheet 3D Files Frequently Asked Questions Which size of Tiered Disk Pendant Light fits my dining table or kitchen island? Match the pendant diameter to your surface. For a 4-seat breakfast nook, small dining table, or single-pendant kitchen island : pick Size S (∅17.7"). For a standard 6-seat dining table, larger kitchen island, or entryway centerpiece : pick Size M (∅22.1"). For long tables or 8+ seat dining rooms, hang 2 Tiered Disk pendants spaced 32 inches apart center-to-center. Is the Tiered Disk Pendant Light dimmable? The Tiered Disk Pendant Light itself has no built-in dimmer — it uses a standard hardwired connection to your existing wall switch. To dim, install a dimmable LED bulb (E26 in US/CA, E27 in EU/AU) and pair it with a compatible LED-rated wall dimmer (any standard TRIAC or trailing-edge dimmer from a hardware store). With this setup you can dim from 10% to 100%. Which finish should I pick — white, white with rose gold, or blue? White : clean Scandinavian or Nordic minimal interiors, works with almost any decor. White + Rose Gold : adds a warm metallic accent — pairs with brass hardware, terracotta tones, modern romantic interiors. Blue : bolder statement piece — pairs with white kitchens, light wood, navy upholstery, mid-century modern living rooms. Each Tiered Disk Pendant Light ships with one chosen finish. What bulb does the Tiered Disk Pendant Light use, and is LED OK? The Tiered Disk Pendant Light uses an E26 (US/CA) or E27 (EU/AU) base bulb. Maximum 40W incandescent or equivalent. Warm White 2700-3000K LED (~6-8W for 40W-equivalent output) recommended. LED is fully compatible and uses less heat — important since the aluminum shades sit close to the bulb. Bulbs sold separately. How is the Tiered Disk Pendant Light installed? Hardwired ceiling pendant. A licensed electrician connects the white canopy to your ceiling junction box, adjusts the cable to your preferred drop length, and screws the bulb into the E26/E27 socket. For dining or kitchen island use, hang 30-36 inches above the surface. The 78.7-inch cable can be shortened during install or extended on request.
Price Range
$246 – $282 / pieceper piece
Indicative piece price · final quote depends on spec, qty & freight.
MOQ
1 piece
Lead Time
3–7 business days
Incoterms
EXW
Verified supplier
Vakker Light
📍 US
Colour: White
Size: ∅ 17.7″ x H 6.3″ / Dia 45cm x H 16cm
Quantity (number of units to quote)
Vendor MOQ: 1 pieceSpotyard is a sourcing partner — not a retailer. Build a shortlist below and we'll quote final pricing after confirming with the supplier.
Product Details
The Tiered Disk Pendant Light is a minimalist multi-tier white aluminum pendant with stacked saucer-shaped shades hanging from a single white cable. Available in 2 diameters (∅17.7" and ∅22.1") and 3 finishes — white, white with rose gold accent, and blue — for dining tables, kitchen islands, bedrooms, home offices, breakfast nooks, and entryways. Pairs well with Scandinavian, Nordic, mid-century modern, and minimalist interiors. E26 (US/CA) or E27 (EU/AU) base accepts standard LED bulbs up to 40W.
Tiered Disk Pendant Light · stacked saucer shades · single cable
Stacked Aluminum Disks
Lightweight spun aluminum shades layered for soft downward light.
Single Cable Suspension
Clean single white cable with a small white canopy — no visible hardware.
2 Sizes × 3 Finishes
Pick 17.7" or 22.1" diameter, in white, white with rose gold, or blue.
Indoor dry location only
The Tiered Disk Pendant Light is rated for indoor dry locations — dining rooms, kitchens, bedrooms, living rooms, and offices. Do not install in bathrooms above a tub or shower, kitchens directly above a sink, or any outdoor area.
Drop above a dining table
For dining or kitchen island installation, hang the bottom of the Tiered Disk Pendant Light 30-36 inches above the table surface. The 78.7-inch cable can be shortened during install or extended on request.
| Materials | Spun aluminum shades · powder-coated finish |
| Light source | LED or Edison bulb (sold separately) |
| Base type | E26 (US/CA) · E27 (EU/AU) |
| Bulb maximum | 40W (LED equivalent recommended — 6-8W LED for 40W output) |
| Recommended bulb | Warm White 2700-3000K LED · dimmable LED with compatible dimmer |
| Voltage | AC 110-240V |
| Finishes | White · White + Rose Gold · Blue (pick one) |
| Cable | 78.7" (200 cm) adjustable white cable · extendable on request |
| Canopy | Small white round canopy |
| Mounting | Hardwired ceiling pendant |
| Control | Standard wall switch (not included) · dimmable with compatible LED bulb + dimmer |
| Weight | ~8.8 lbs (4 kg) |
| Environment | Indoor · dry locations only |
| Certification | Compliant with North America, EU, Australia, Saudi Arabia standards |
- Hardwired ceiling install — use a licensed electrician.
- Hang 30-36" above dining table or kitchen island surface.
- E26 (US/CA) or E27 (EU/AU) Warm LED bulb up to 40W.
- For dimming, pair a dimmable LED bulb with a compatible wall dimmer.
Which size of Tiered Disk Pendant Light fits my dining table or kitchen island?
Match the pendant diameter to your surface. For a 4-seat breakfast nook, small dining table, or single-pendant kitchen island: pick Size S (∅17.7"). For a standard 6-seat dining table, larger kitchen island, or entryway centerpiece: pick Size M (∅22.1"). For long tables or 8+ seat dining rooms, hang 2 Tiered Disk pendants spaced 32 inches apart center-to-center.
Is the Tiered Disk Pendant Light dimmable?
The Tiered Disk Pendant Light itself has no built-in dimmer — it uses a standard hardwired connection to your existing wall switch. To dim, install a dimmable LED bulb (E26 in US/CA, E27 in EU/AU) and pair it with a compatible LED-rated wall dimmer (any standard TRIAC or trailing-edge dimmer from a hardware store). With this setup you can dim from 10% to 100%.
Which finish should I pick — white, white with rose gold, or blue?
White: clean Scandinavian or Nordic minimal interiors, works with almost any decor. White + Rose Gold: adds a warm metallic accent — pairs with brass hardware, terracotta tones, modern romantic interiors. Blue: bolder statement piece — pairs with white kitchens, light wood, navy upholstery, mid-century modern living rooms. Each Tiered Disk Pendant Light ships with one chosen finish.
What bulb does the Tiered Disk Pendant Light use, and is LED OK?
The Tiered Disk Pendant Light uses an E26 (US/CA) or E27 (EU/AU) base bulb. Maximum 40W incandescent or equivalent. Warm White 2700-3000K LED (~6-8W for 40W-equivalent output) recommended. LED is fully compatible and uses less heat — important since the aluminum shades sit close to the bulb. Bulbs sold separately.
How is the Tiered Disk Pendant Light installed?
Hardwired ceiling pendant. A licensed electrician connects the white canopy to your ceiling junction box, adjusts the cable to your preferred drop length, and screws the bulb into the E26/E27 socket. For dining or kitchen island use, hang 30-36 inches above the surface. The 78.7-inch cable can be shortened during install or extended on request.
Specifications
- E27 bulb base
- Adjustable drop length
- Gold finish
Shipping Notes
Ships from US warehouse.
Frequently Asked Questions
Sourcing, Incoterms, MOQ, QC, shipping, customs and warranty — answered. Need more detail? Visit our full FAQ or talk to a sourcing agent.
How does Spotyard source Tiered Disk Pendant Light?
We work directly with verified factories in China — not trading companies — for Lamps & Lighting. For every enquiry we shortlist 2–3 audited suppliers, negotiate pricing on your behalf, request samples, and run a pre-shipment QC inspection before goods leave the port. You only pay one combined invoice in AUD.
What is the minimum order quantity (MOQ)?
For Tiered Disk Pendant Light the typical MOQ is 1 piece. Many factories will accept smaller trial orders if you commit to a follow-up PO, and we can sometimes consolidate multiple buyers into one container to bring the per-unit MOQ down.
Which Incoterms do you offer? (FOB vs CIF vs DDP)
We can quote EXW. EXW is factory pickup only. FOB covers everything up to the Chinese port. CIF adds ocean freight + insurance to the destination port. DDP (Delivered Duty Paid) is door-to-door including customs clearance, duties, GST and final-mile delivery in Australia — this is what we recommend for first-time importers because there are no surprise costs.
How is pricing calculated and what's included?
Indicative pricing for Tiered Disk Pendant Light starts from $246 per piece. Final quotes break down: factory unit price, customisation/tooling, packaging, inland trucking in China, ocean freight, marine insurance, Australian customs duty + GST, port charges, and final-mile delivery. Use our shipping calculator and customs duty calculator to estimate landed cost before you commit.
Can I get a sample before placing a bulk order?
Yes. We strongly recommend ordering 1–3 samples first to verify quality, finish and dimensions. Sample cost is usually credited back against your first bulk order. Air freight to Australia takes 5–8 business days; we handle customs for samples too.
What is the typical lead time?
Production lead time for Tiered Disk Pendant Light is 3–7 business days. Add 25–35 days for sea freight to Sydney/Melbourne/Brisbane (or 5–8 days for air freight). Total door-to-door timeline is usually 6–10 weeks for sea, 4–6 weeks for air. Use our transit time calculator for a more precise estimate.
How do you ensure quality control?
Every order includes (1) pre-production sample approval, (2) in-line inspection during manufacturing for orders over $20k, and (3) a mandatory pre-shipment inspection (PSI) using AQL 2.5 sampling. You receive a photo + video QC report before we authorise the supplier to ship. If the order fails inspection, the supplier reworks at their cost.
What payment terms and methods do you accept?
Standard terms are 30% deposit on PO, 70% balance after QC pass and before bill of lading is released. For repeat customers we offer 30/40/30 (deposit / production milestone / on delivery). We invoice in AUD and accept bank transfer (PayID, BSB+Account) and credit card (1.8% surcharge). All supplier payments are routed through Spotyard so you never wire money to China.
Sea freight or air freight — which should I choose?
Sea (FCL/LCL) is 5–10× cheaper per kg but takes 25–35 days. Use it for stock orders or anything over 1 CBM. Air freight is fast (5–8 days) but expensive — use it for samples, urgent restocks, or shipments under 100kg. Read our FCL vs LCL guide to choose the right container option.
What about Australian customs, duty and GST?
For Lamps & Lighting, expect 0–5% import duty (most categories under ChAFTA are duty-free with a Certificate of Origin) plus 10% GST on the CIF value + duty + freight. Spotyard handles the full clearance through a licensed customs broker, lodges the import declaration, and provides a tax invoice you can claim GST back on through your BAS.
What happens if the product is faulty or damaged?
All orders are covered by a 12-month workmanship warranty. Damage in transit is covered by marine insurance (included in CIF/DDP quotes). If you receive a defective batch, send us photos within 14 days — we negotiate replacement, credit, or refund directly with the factory on your behalf at no extra fee.
Can I customise Tiered Disk Pendant Light (logo, colour, packaging)?
Yes — most factories offer OEM/ODM customisation including custom colours, fabrics, dimensions, branded labels, retail packaging, barcodes, and assembly instructions. Tooling fees (if any) are a one-off and quoted upfront. Send us your specs or a reference image and we'll come back with options.
More from Lamps & Lighting
Other items in this category we can source for you.
Browse other product categories
Helpful tools & resources
Shipping cost
Estimate sea/air freight from China.
Customs & duty
Calculate AU duty + 10% GST.
Container fit
20ft / 40ft loading planner.
Transit time
Door-to-door delivery estimator.
Knowledge base
Importer guides & checklists.
Full FAQ
Every importer question answered.
Our services
Sourcing, QC, freight, fulfilment.
FCL vs LCL
Pick the right container option.
How sourcing this works with Spotyard
You enquire
Submit RFQ or message us with quantity & specs.
We quote
Verified factory pricing, MOQ and total landed cost.
QC inspection
Pre-shipment inspection before goods leave China.
DDP delivery
We handle freight, customs and final-mile in Australia.
Ready to source Tiered Disk Pendant Light?
Tell us your target price and quantity. We'll come back with verified Chinese suppliers, total landed cost to your door, and a realistic timeline.
$246 – $282 / piece
MOQ: 1 piece · Qty: 1